About Tape Storage And Maintenance And Maintenance

(1) The tape should be stored in the warehouse to avoid sun exposure and rain; it is forbidden to contact organic solvents with acid and alkali oil, keep it clean and dry, and the room temperature is between -15 ° C ~ 40 ° C outside of the found device 1M.
(2) The tape should be placed in rolls, not folded, and the storage time should be turned once every season.
(3) It is best to use a crane when loading the conveyor belt, and hang it up steadily with a tick with a beam to avoid damaging the side. Do not install it horizontally, causing the loose roll to throw the sleeve.
(4) The types of tape should be selected reasonably according to the needs and specific conditions of use.
(5) Do not use different varieties, different specifications, strengths, strength, and cloth layer tape connections (partnerships) together.
(6) The conveyor belt joint is best to use thermal vulcanized adhesive to improve reliability and maintain higher effective strength.
(7) The teleportation roller of the conveyor's density diameter and the minimum wheel diameter of the conveyor belt shall comply with relevant regulations.
(8) Do not make the tape snake or creep, keep the dragg roller, the roller is flexible, and the tight force should be moderate.
(9) When the conveyor is equipped with a baffle and a jacket, the tape should be avoided.
(10) Cleanness is the basic condition for the good operation of the tape. Foreign material will affect the eccentricity of the belt, the difference in tension, and even the break.
(11) When the tape is found in the use of early damage, it should be found in time to find the cause and repair to avoid adverse consequences.